Shower Pan Accessories

Panels for Creating Slope in the Shower Pan

We carry multiple sizes suitable for many different installation types, but better still, all slope and flat panels can be cut with a utility knife to ensure a custom fit for your project.

© Katie Girtman

SLPANADA48 – Quick Slope

Slope panels designed specially for use in ADA showers. 100% recycled PET foam with a compression strength of 145 psi. This kit includes three (3) 48″x16″ prefabricated one-way sloping material pre-cut at a 2% pitch. Leading edge at the drain is 3/16″; trailing edge away from the drain is 1-3/16″. SLPANADA48-64-ProLine Specs

SLPANADA64 – Quick Slope

Slope panels designed specially for use in ADA showers. 100% recycled PET foam with a compression strength of 145 psi. This kit includes four (4) 48″x16″ prefabricated one-way sloping material pre-cut at a 2% pitch. Leading edge at the drain is 3/16″; trailing edge away from the drain is 1-3/16″. SLPANADA48-64-ProLine Specs

QS30P – Quick Slope ****NO LONGER AVAILABLE****

Polypropylene honeycomb material with a compression strength of 230 psi. 30” x 30” x 1/8” to 3/4” prefabricated one-way sloping material pre-cut at a 2% pitch. Leading edge at the drain is 1/8”; trailing edge away from the drain is 3/4”. QS30P Specs

QS60SS – Quick Slope ****NO LONGER AVAILABLE****

Polypropylene honeycomb material with a compression strength of 230 psi. 30” x 60” x 1/8: to 1-3/8” prefabricated one-way sloping material pre-cut at a 2% pitch. Leading edge at drain (30” side) is 1/8”; trailing edge away from drain is 1-3/8”. Ideal for tub-to-shower conversions where waste line is below the subfloor. QS60SS Specs

QS8PP – Quick Slope 

Polypropylene honeycomb material with a compression strength of 230 psi. 30” x 8” x1/8” to 3/8” prefabricated one-way sloping material pre-cut at a 2% pitch. Leading edge at the drain is 1/8”; trailing edge away from the drain is 3/8”. Ideal for drain placement that is 8” or less from wall. QS8PP Specs

© Katie Girtman

FP30P – Flat Panel ****NO LONGER AVAILABLE****

Polypropylene honeycomb material with a compression strength of 230 psi. 30” x 30” x 5/8” flat sheet with a veil for thinset adhesion. Serves as an extension for slopes or shower pans with a run larger than 30”. Quick Slope is placed on top of Flat Panel to extend the slope. FP30P Specs

FP30P1 – Flat Panel 

Polypropylene honeycomb material with a compression strength of 230 psi. 30” x 30” x 1” flat sheet with a veil for thinset adhesion. Serves as a filler under Quick Slope for above-floor installations. FP30P1 Specs

FP60P1 – Flat Panel 

Polypropylene honeycomb material with a compression strength of 230 psi. 30” x 60” x 1” flat sheet with a veil for thinset adhesion. Serves as a filler under Quick Slope for above-floor installations. Ideal for tub-to-shower conversions where the drain is set above the subfloor. FP60P1 Specs

FP60P3 – Flat Panel 

Polypropylene honeycomb material with a compression strength of 230 psi. 30”x 60” x 3” flat sheet with a veil for thinset adhesion. Serves as a filler under Quick Slope for above-floor installations. Ideal for tub-to-shower conversions where there is no penetration into the subfloor and waste line is in the chase behind the wall. Used with side waste outlet drains. FP60P3 Specs

Curb Forms

All of our curb forms are made from rigid PET foam with a compression strength of 270 psi. They can also be cut with a utility knife.

CURB3 – Curb Form – 3”

2-1/2” x 3-1/2” x 61”. Ideal for tub-to-shower conversions where the waste line is below the subfloor. CURB3 Specs

CURB5 – Curb Form – 5”

2-1/2” x 5” x 61”. Ideal for tub-to-shower conversions where there is no penetration into the subfloor and the waste line is in the chase behind the wall. CURB5 Specs

 

Installation Aids

SP1/2 (not pictured), SP1, SP1-1/2, SP1-3/4, SP2-1/2 – Metal Spacers

Spacer 175 Spacer 25 Spacer 15 Spacer 1

Used for setting the distance between the top of the drain body and top of the finished floor so the cover sits flush with the finished floor. For use in applications where the cover needs to be secured with cap screws. For most applications, the standard included adjustable height spacers should be used. SP2-1/2 Specs | SP1-3/4 Specs | SP1-1/2 Specs | SP1 Specs | SP1/2 Specs

PLBSS – Placement Bracket

Placement Brackets

Metal saddle for drain body which is set directly into recess in subfloor. Two brackets are used to ensure installation is level with the subfloor and to set correct distance from drain to wall. PLBSS Specs

LVBSS – Leveling Bracket – Short

Short Leveling Brackets

Metal saddle with two leveling screws, one set screw and L-shaped wall connector. For use for installations that are above the subfloor. One bracket is placed on either end of drain to keep drain parallel and set the correct distance from drain to wall. Distance between drain and wall may be set up to 3”. LVBSS Specs

LVBSL – Leveling Bracket – Long

Long Leveling Brackets

Metal saddle with two leveling screws, one set screw and L-shaped wall connector. For use for installations that are above the subfloor. One bracket is placed on either end of drain to keep drain parallel and set the correct distance from drain to wall. Distance between drain and wall may be set from 3” to 6”. LVBSL Specs

EX4SS – Trough Extension

Used on top of waterproofing as a trough extension where the cover is longer than the trough itself. EX4SS Specs

ILCSS – In-Line Cover Connector

© Katie Girtman

Connects multiple covers in a line. For use with VERTICAL, HORIZONTAL, and COSMO styles only. ILCSS Specs

NH2-2 – No-hub Coupling

2” to 2”

NH2-1-1/2” – No Hub Coupling

2” to 1-1/2”