Products

PLD26 - Drain Body 26
PLD26 - Drain Body 26
Made of 18 Gauge 316L Stainless Steel. Trough is internally pitched 1-inch deep and 1-inch wide. Waterproofing membrane is factory attached 6" around the perimeter of the trough. Total length with flanges is 28". Fits rough opening from 28.5" to 32". Finished opening is from 26" to 30". At this length, the waste outlet will be centered on the drain body.

A complete drain assembly will include: 1) drain body, 2) cover (sold separately), and 3) spacers (spacers ship with the cover – if the spacer size needed is 1”, 1 ½”, 1 ¾” or 2 ½”, please indicate).

 

 

downloads  > >
PLD27.5 - Drain Body 27.5
PLD27.5 - Drain Body 27.5

 

Made of 18 Gauge 316L Stainless Steel. Trough is internally pitched 1-inch deep and 1-inch wide. Waterproofing membrane is factory attached 6" around the perimeter of the trough. Total length with flanges is 29.5". Fits rough opening from 30" to 35.5". Finished opening is from 26" to 30". At this length, the waste outlet will be centered on the drain body.  

A complete drain assembly will include: 1) drain body, 2) cover (sold separately), and 3) spacers (spacers ship with the cover – if the spacer size needed is 1”, 1 ½”, 1 ¾” or 2 ½”, please indicate).

 

 

 

downloads  > >
PLD30 - Drain Body 30
PLD30 - Drain Body 30
Made of 18 Gauge 316L Stainless Steel. Trough is internally pitched 1-inch deep and 1-inch wide. Waterproofing membrane is factory attached 6" around the perimeter of the trough. Total length with flanges is 30". Fits rough opening from 32.5" to 38 ". Finished opening is from 30" to 36". At this length, the waste outlet will be offset 3" from center.
 

A complete drain assembly will include: 1) drain body, 2) cover (sold separately), and 3) spacers (spacers ship with the cover – if the spacer size needed is 1”, 1 ½”, 1 ¾” or 2 ½”, please indicate).

 

downloads  > >
PLD36 - Drain Body 36
PLD36 - Drain Body 36

Made of 18 Gauge 316L Stainless Steel. Trough is internally pitched 1-inch deep and 1-inch wide. Waterproofing membrane is factory attached 6" around the perimeter of the trough. Total length with flanges is 38". Fits rough opening from 38.5" to 42 ". Finished opening is from 36" to 40". At this length, the waste outlet will be offset 3" from center.

 

A complete drain assembly will include: 1) drain body, 2) cover (sold separately), and 3) spacers (spacers ship with the cover – if the spacer size needed is 1”, 1 ½”, 1 ¾” or 2 ½”, please indicate).

 

 

downloads  > >
PLD40 - Drain Body 40
PLD40 - Drain Body 40

Made of 18 Gauge 316L Stainless Steel. Trough is internally pitched 1-inch deep and 1-inch wide. Waterproofing membrane is factory attached 6" around the perimeter of the trough. Total length with flanges is 42". Fits rough opening from 42.5" to 46 ". Finished opening is from 40" to 44". At this length, the waste outlet will be offset 3" from center.

 

A complete drain assembly will include: 1) drain body, 2) cover (sold separately), and 3) spacers (spacers ship with the cover – if the spacer size needed is 1”, 1 ½”, 1 ¾” or 2 ½”, please indicate).


 

downloads  > >
PLD44 - Drain Body 44
PLD44 - Drain Body 44

Made of 18 Gauge 316L Stainless Steel. Trough is internally pitched 1-inch deep and 1-inch wide. Waterproofing membrane is factory attached 6" around the perimeter of the trough. Total length with flanges is 46". Fits rough opening from 46.5" to 48 ". Finished opening is from 44" to 46". At this length, the waste outlet will be offset 3" from center.

 

A complete drain assembly will include: 1) drain body, 2) cover (sold separately), and 3) spacers (spacers ship with the cover – if the spacer size needed is 1”, 1 ½”, 1 ¾” or 2 ½”, please indicate).

 

downloads  > >
PLD46 - Drain Body 46
PLD46 - Drain Body 46

Made of 18 Gauge 316L Stainless Steel. Trough is internally pitched 1-inch deep and 1-inch wide. Waterproofing membrane is factory attached 6" around the perimeter of the trough. Total length with flanges is 48". Fits rough opening from 48.5" to 50 ". Finished opening is from 46" to 48". At this length, the waste outlet will be centered on the drain body.

 

A complete drain assembly will include: 1) drain body, 2) cover (sold separately), and 3) spacers (spacers ship with the cover – if the spacer size needed is 1”, 1 ½”, 1 ¾” or 2 ½”, please indicate).

 


downloads  > >
PLD48 - Drain Body 48
PLD48 - Drain Body 48

Made of 18 Gauge 316L Stainless Steel. Trough is internally pitched 1-inch deep and 1-inch wide. Waterproofing membrane is factory attached 6" around the perimeter of the trough. Total length with flanges is 50". Fits rough opening from 50.5" to 54 ". Finished opening is from 48" to 52". At this length, the waste outlet will be offset 3" from center.

 

A complete drain assembly will include: 1) drain body, 2) cover (sold separately), and 3) spacers (spacers ship with the cover – if the spacer size needed is 1”, 1 ½”, 1 ¾” or 2 ½”, please indicate).

 

downloads  > >
PLD52 - Drain Body 52
PLD52 - Drain Body 52

Made of 18 Gauge 316L Stainless Steel. Trough is internally pitched 1-inch deep and 1-inch wide. Waterproofing membrane is factory attached 6" around the perimeter of the trough. Total length with flanges is 54". Fits rough opening from 54.5" to 60". Finished opening is from 52" to 58". At this length, the waste outlet will be offset 3" from center.

 

A complete drain assembly will include: 1) drain body, 2) cover (sold separately), and 3) spacers (spacers ship with the cover – if the spacer size needed is 1”, 1 ½”, 1 ¾” or 2 ½”, please indicate).

downloads  > >
PLD57-58 - Drain Body 57
PLD57-58 - Drain Body 57

Made of 18 Gauge 316L Stainless Steel. Trough is internally pitched 1-inch deep and 1-inch wide. Waterproofing membrane is factory attached 6" around the perimeter of the trough. Total length with flanges is 59". Fits rough opening from 59.5" to 65". Finished opening is from 57" to 63". At this length, the waste outlet will be offset 3" from center.

 

A complete drain assembly will include: 1) drain body, 2) cover (sold separately), and 3) spacers (spacers ship with the cover – if the spacer size needed is 1”, 1 ½”, 1 ¾” or 2 ½”, please indicate).

downloads  > >
PLD63 - Drain Body 63
PLD63 - Drain Body 63

Made of 18 Gauge 316L Stainless Steel. Trough is internally pitched 1-inch deep and 1-inch wide. Waterproofing membrane is factory attached 6" around the perimeter of the trough. Total length with flanges is 65". Fits rough opening from 65.5" to 70". Finished opening is from 63" to 68". At this length, the waste outlet will be centered on the drain body.

A complete drain assembly will include: 1) drain body, 2) cover (sold separately), and 3) spacers (spacers ship with the cover – if the spacer size needed is 1”, 1 ½”, 1 ¾” or 2 ½”, please indicate).

downloads  > >
PLD68 - Drain Body 68
PLD68 - Drain Body 68

Made of 18 Gauge 316L Stainless Steel. Trough is internally pitched 1-inch deep and 1-inch wide. Waterproofing membrane is factory attached 6" around the perimeter of the trough. Total length with flanges is 70". Fits rough opening from 70.5" to 76". Finished opening is from 68" to 74". At this length, the waste outlet will be centered on drain body.

 

A complete drain assembly will include: 1) drain body, 2) cover (sold separately), and 3) spacers (spacers ship with the cover – if the spacer size needed is 1”, 1 ½”, 1 ¾” or 2 ½”, please indicate).



downloads  > >
Stream - A Michael Graves Design
Stream - A Michael Graves Design
** New Michael Graves Design **
Width: 1 1/2"
Thickness: 3/8"
Material: 304 Stainless Steel
Available Lengths: 18", 28", 30", 36", 40", 44", 46", 48", 52", 58", 63" and 68"
Custom sizes have to be specified when order is placed.
downloads  > >
Cosmo - Michael Graves Design
Cosmo - Michael Graves Design
** New Michael Graves Design **
Width: 1 1/2"
Thickness: 3/8"
Material: 18 Gauge 304 Stainless Steel
Available Lengths: 18", 28", 30", 36", 40", 44", 46", 48", 52", 58", 63" and 68"
Custom sizes have to be specified when order is placed.
downloads  > >
Lines
Lines
Width: 1 1/2"
Thickness: 3/8"
Material: 304 Stainless Steel
Available Lengths: 18", 28", 30", 36", 40", 44", 46", 48", 52", 58", 63" and 68"
Custom sizes have to be specified when order is placed.
downloads  > >
Tile In New
Tile In New
Width: 1 1/2"
Thickness: 3/8"
Material: 18 Gauge 304 Stainless Steel
Available Lengths: 18", 28", 30", 36", 40", 44", 46", 48", 52", 58", 63" and 68"
Custom sizes have to be specified when order is placed.
downloads  > >
Horizontal
Horizontal

***REINTRODUCED***

Width: 1 1/2"
Thickness: 3/8"
Material: 18 Gauge 304 Stainless Steel.
Available Lengths: 28", 30", 36", 40", 44", 46", 48", 52", 58", 63" and 68"
Custom sizes have to be specified when order is placed.
downloads  > >
Vertical
Vertical

***REINTRODUCED***

Width: 1 1/2"
Thickness: 3/8"
Material: 18 Gauge 304 Stainless Steel
Available Lengths: 28", 30", 36", 40", 44", 46", 48", 52", 58", 63" and 68"
Custom sizes have to be specified when order is placed.
downloads  > >
Waves
Waves

***DISCONTINUED - AVAILABLE WHILE SUPPLIES LAST

Width: 1 1/2"
Thickness: 3/8"
Material: 18
Gauge 304 Stainless Steel
Available Lengths: 28", 30", 36", 40", 44", 46", 48", 52", 58", 63" and 68"
Custom sizes have to be specified when order is placed.
downloads  > >
Diagonal
Diagonal

***DISCONTINUED - AVAILABLE WHILE SUPPLIES LAST

Width: 1 1/2"
Thickness: 3/8"
Material: 18 Gauge 304 Stainless Steel
Available Lengths: 28", 30", 36", 40", 44", 46", 48", 52", 58", 63" and 68"
Custom sizes have to be specified when order is placed.
downloads  > >
Dots
Dots

***DISCONTINUED - AVAILABLE WHILE SUPPLIES LAST

Width: 1 1/2"
Thickness: 3/8"
Material: 18 Gauge 304 Stainless Steel
Available Lengths: 28", 30", 36", 40", 44", 46", 48", 52", 58", 63" and 68"
Custom sizes have to be specified when order is placed.
downloads  > >
Tile In
Tile In

***DISCONTINUED - AVAILABLE WHILE SUPPLIES LAST

Any suitable finish material for showers can be inserted into the channel.
The only strainer that does not get attached to the body by screws.
Width: 1 3/8"
Thickness: 3/8"
Material: 18 Gauge 304 Stainless Steel
Available Lengths: 28", 30", 36", 40", 44", 46", 48", 52", 58", 63" and 68"
Custom sizes have to be specified when order is placed.

 

downloads  > >
New QuickDrain QuickFit Spacers
New QuickDrain QuickFit Spacers

QuickFit Spacers are used to hold the drain cover even with the finished floor. Each package contains one base block and enough spacer blocks to adjust the drain cover from 1/2" to 7/8" above the drain body. However, if you need to raise the top of the cover to a height greater than 7/8" from the top of the drain body, you must use one of the four stainless steel spacers offered, (1", 1.5", 1.75" or 2.5").

downloads  > >
SP 1
SP 1

SP1 is used to set the distance between the flange and the top of the drain cover at 1". This is the same distance as the distance from the waterproofing to the top of finished tile (stone). 

The thickness of the cover itself is included in the spacer measurement.

SP1 is usually used with finish material thickness up to 7/8".

downloads  > >
SP 1-1/2
SP 1-1/2

SP1 1/2 is used to set the distance between the flange and the top of the drain cover at 1 1/2". This is the same distance as the distance from the waterproofing to the top of finished tile (stone). 

The thickness of the cover itself is included in the spacer measurement.

SP1 1/2 is usually used with finish material thickness up to 1 3/8".

downloads  > >
SP 1-3/4
SP 1-3/4

SP1 3/4 is used to set the distance between the flange and the top of the drain cover at 1 3/4". This is the same distance as the distance from the waterproofing to the top of finished tile (stone). 

The thickness of the cover itself is included in the spacer measurement.

SP1 3/4 is usually used with finish material thickness up to 1 1/2".

downloads  > >
SP 2-1/2
SP 2-1/2

SP2 1/2 is used to set the distance between the flange and the top of the drain cover at 2 1/2". This is the same distance as the distance from the waterproofing to the top of finished tile (stone). 

The thickness of the cover itself is included in the spacer measurement.

SP2 1/2 is usually used with finish material thickness up to 2 1/4".


downloads  > >