Custom Shower Drain

Irregular Sizes
Irregular Sizes
ProLine Drains can be manufactured in any sizesfrom 10to 100 inches. Drain bodies longer than 70" have to be set up with two waste outlets due to the distance from the waste outlet, the depth of the trough and the built in slope.
downloads  > >
Multiple Waste Outlet - Two Waste Outlets
Multiple Waste Outlet - Two Waste Outlets

Multiple Outlets - Water flow output of more than 10 gallons per minute can be addressed with additional outlets on the drain body. The appearance is the same as a standard drain, but the capacity can double or triple. Any amount of flow volume can be achieved with this system.

downloads  > >
Multiple Waste Outlet - Three Waste Outlets
Multiple Waste Outlet - Three Waste Outlets
Multiple Outlets - Water flow output of more than 10 gallons per minute can be addressed with additional outlets on the drain body. The appearance is the same as a standard drain, but the capacity can double or triple. Any amount of flow volume can be achieved with this system.
downloads  > >
Side Outlet Drains
Side Outlet Drains

Side Outlet Primarily used in retrofitting situations. When there are limitations on the space and location of the existing floors and outlets, the side outlet drops and turns 90 degrees. Can eliminate the need to drill through concrete.

downloads  > >
Commercial Waste Outelet
Commercial Waste Outelet

Commercial Waste Outlets Waste outlets can be made in custom lengths from 2 below the trough to 14 below the trough. Commercial facilities usually require longer waste outlets due to issues with fireproofing. Longer pipes for waste lines go through the whole concrete floor and the plumbing connection is done below the fireproofing.

downloads  > >
Resinous Flooring Drains
Resinous Flooring Drains

Resinous Flooring These drains are suitable for epoxy, urethane and sheet vinyl flooring. Mainly for commercial uses. Total height from waterproofing to the finished floor is 3/16.

downloads  > >